CT-101 Dry Film Lubricant

Category: Dry Film Lubricant

Description

CT-101 is a Dry Film Lubricant coating with lubricating solids. CT-101 provides solid lubrication of parts subject to torque or contact stresses. It is not affected by dust or dirt. This is to be used in combination with oil, grease or paste. It provides intermittent dry lubrication properties.

Federal Firearms Licensee (FFL)

Substrate(s)

Tin
Lead
Aluminum
Steel
Stainless Steel

Temp. Ratings

Process Temp: 400°(204°C)

Thickness

Thickness (mil): 0.2 - 0.5

Color(s)

Gray
Black

Process

CT-101 Dry Film Lubricant coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates are used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness varies from 0.2 - 0.5 mil up to three coats. Coating consists of phenolic resins with MoS2.

Advantages

Not affected by dust or dirt, Low friction, Provides intermittent dry lubrication, Excellent load carrying capacity, Thin coating to accommodate assembly constraints. CT-101 meets Mil-L-8937D, MIL-DTL-46010E, Type 1, and AS-5272, Type 1.

Corrosion Protection
Increased Lubricity
Low Coefficient of Friction
Oil and Fuel Resistant

Applications

Recommended applications include, but are not limited to the following:

Bushings
Engine Bearings
Hinges
Springs
Slides
Spindles
Nuts and Bolts
Gears
Camshafts
Locks
Switches
Valve Springs
Oil Pumps

Industries

This coating is a popular solution for the following industries:

Aerospace
Automotive
Chemical
Diesel
Energy
General Manufacturing
Marine
Metal Forming
Military
Molds
Motorsports
Nuclear
Oil and Gas
Weaponry