CT-15 FEP Coating

Category: FEP Coating

CT-15 FEP Coating


CT-15 is a non-stick FEP coating with a polyamide-imide binder used on metallic substrates to reduce sticking tendency and also to provide a tough, durable film for dry lubrication and good abrasion resistance.


  • Tin
  • Lead
  • Aluminum
  • Steel
  • Stainless Steel

Temp. Ratings

  • Process Temp: 400°(204°C)
  • Max Temp: 425°(218°C)
  • Int. Temp: 450°(232°C)


  • Thickness (mil): 0.5 - 0.8


  • Black


CT-15 non-stick coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates will be used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness varies from 0.5 to 0.8 mil (12 - 20 microns) and can be recoated up to 3.0 mils. Can be coated on ferrous and non ferrous substrates.


Low coefficient of friction, Good release characteristics, Corrosion resistant, Relatively low cure temperature, Abrasion resistant, Taber wear test - approximately 9 milligrams per 500 cycles, Does not affect magnetic particle inspection for cracks.

  • Abrasion Resistant
  • Corrosion Protection
  • Low Coefficient of Friction


Recommended applications include, but are not limited to the following:

  • Transmission Cases
  • Third Member Cases
  • Suspension Components
  • Radiators
  • Gun Components
  • Cam Bearings
  • Slides


This coating is a popular solution for the following industries:

  • Aerospace
  • Automotive
  • Chemical
  • Diesel
  • Energy
  • General Manufacturing
  • Marine
  • Metal Forming
  • Military
  • Molds
  • Motorsports
  • Nuclear
  • Oil and Gas