CT-44 Dark Gray PTFE Coating

Category: PTFE Coating

CT-44 Dark Gray PTFE Coating

Description

CT-44 is a Dark Gray non-stick coating applied as a spray process. Different surface preparatory methods appropriate for the substrates will be used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness varies from 0.6 to 1.2 mils (15 to 30 microns). Can be coated on ferrous and non-ferrous substrates.

Substrate(s)

  • Steel
  • Stainless Steel
  • Aluminum

Temp. Ratings

  • Process Temp: 400°(204°C)
  • Max Temp: 500°(260°C)
  • Int. Temp: 575°(301°C)

Thickness

  • Thickness (mil): 0.5 - 1

Color(s)

  • Dark Gray

Process

CT-44 non-stick coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates will be used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness varies from 0.6 to 1.2 mils (15 to 30 microns). Can be coated on ferrous and non-ferrous substrates.

Advantages

Low coefficient of friction, Good release characteristics, Corrosion Resistant, Low cure temperature, Abrasion resistant, Taber wear test - approximately 24 milligrams per 1000 cycles, Does not affect magnetic particle inspection for cracks.

  • Abrasion Resistant
  • Chemical Resistant
  • Corrosion Protection
  • Low Coefficient of Friction

Applications

Recommended applications include, but are not limited to the following:

  • Transmission Cases
  • Third Member Cases
  • Suspension Components
  • Radiators
  • Gun Components

Industries

This coating is a popular solution for the following industries:

  • Aerospace
  • Automotive
  • Chemical
  • Diesel
  • Energy
  • General Manufacturing
  • Marine
  • Motorsports
  • Nuclear
  • Oil and Gas