CT-605 Charcoal Metallic PTFE/FEP Coating

Category: PTFE Coating, FEP Coating

CT-605 Charcoal Metallic PTFE/FEP Coating


CT-605 is a PTFE/FEP metallic reinforced charcoal non-stick coating for rolled and cast aluminum, steel, and stainless steel substrates that provides exceptional mold release, good lubricity and lower frictional surface. This is a premium release coating for industrial applications.


  • Aluminum
  • Steel
  • Stainless Steel

Temp. Ratings

  • Process Temp: 750°(398°C)
  • Max Temp: 500°(260°C)
  • Int. Temp: 600°(315°C)


  • Thickness (mil): 0.6 - 2.4


  • Dark Gray


CT-605 non-stick PTFE/FEP coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates will be used prior to the coating process. Typical coating thickness is 0.6 - 1.2 mil (15 - 30 microns). Can be coated on rolled and cast aluminum, steel and stainless steel substrates.


Exceptional Mold Release, Good Lubricity, Lower Frictional Surface, Water borne coating, FDA compliant, Extra long release, Good non-wetting, High temperature resistant.

  • Abrasion Resistant
  • Chemical Resistant
  • Corrosion Protection
  • Heat Resistant
  • Increased Lubricity
  • Oxidation Resistant
  • Non-wetting
  • Wear Resistant


Recommended applications include, but are not limited to the following:

  • Pans
  • Rubber Molds
  • FDA Compliant Applications
  • Ink Reservoirs
  • Waffle Irons
  • Food Trays
  • Sandwich Toaster
  • Grills
  • Heat Sealing Bars
  • Tire Molds
  • Injection Molding Equipment
  • Process Impellers
  • Packaging Equipment


This coating is a popular solution for the following industries:

  • Chemical
  • Food Processing
  • General Manufacturing
  • Molds
  • Oil and Gas