CT-63 FDA Compliant FEP Coating

Category: FEP Coating

CT-63 FDA Compliant FEP Coating

Description

CT-63 is an FEP non-stick coating for aluminum, steel and stainless steel substrates that reduces sticking tendency and also provides a frictionless surface. This can also be used in cookware and is FDA compliant. Tire mold coating.

Substrate(s)

  • Aluminum
  • Steel
  • Stainless Steel

Temp. Ratings

  • Process Temp: 750°(398°C)
  • Max Temp: 450°(232°C)
  • Int. Temp: 500°(260°C)

Thickness

  • Thickness (mil): 0.8 - 2.4

Color(s)

  • Green

Process

CT-63 non-stick coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates will be used prior to the coating process. Typical coating thickness is 1.0 mil per coat (0.001 inch or 25 microns) up to three coats. Can be used on aluminum, steel, and stainless steel substrates.

Advantages

Non-stick properties, Dishwasher safe, Chemical resistant, Stain resistant, High temperature resistant, FDA Compliant

  • Abrasion Resistant
  • Acid Resistant
  • Chemical Resistant
  • Corrosion Protection
  • Heat Resistant
  • Increased Lubricity
  • Non-wetting
  • Oxidation Resistant
  • Reduced Friction
  • Stain Resistant
  • Wear Resistant

Applications

Recommended applications include, but are not limited to the following:

  • Waffle Irons
  • Food Trays
  • Sandwich Toaster
  • Grills
  • Heat Sealing Bars
  • Tire Molds
  • Injection Molding Equipment
  • Process Impellers
  • Chutes
  • Packaging Equipment
  • Pump Equipment
  • Endoscopy Equipment

Industries

This coating is a popular solution for the following industries:

  • Chemical
  • General Manufacturing
  • Metal Forming
  • Molds
  • Oil and Gas